+852 8191 4909

SkypeSkype Me™!


Ceramic Pro featured at the Top Gear Festival Sydney


NEW three video-test that tell about the amazing properties of Ceramic PRO 9H made by our partner from Moscow MOSMOYKA

Nano-Shine Ltd would like to provide partners a special demo kit to
demonstrate Ceramic Pro 9H in their shops
Nano-textile is cooming soon
For glass and metal surface

Ceramic PRO for leather only

Ceramic Pro Leather

  • Long longevity to 6 months
  • Easy to clean
  • Super Hydrophobic effect
  • Excellent weather resistance
  • UV and corrosion resistance
  • Color Renew and Saturated


The object surface is protected through a coating which is based on ceramic molecular net. Every object surface sealed this way stays clean a much longer period of time and can be cleaned much easier and quicker.


  • Transparent and colorless liquid which doesn't impact the substrate color
  • Nano particle to fill into the capillary of surface to be the protection
  • High gloss to improve the color saturation of surface
  • No resin and scrub particle contains
  • Resistance of UV/ temperature/ corrosion
  • Over 100 degree water contact angle to offer excellent water repellence

    Consumption - 50ml/bottle; 30*30cm/ml
    Processing Temperature - 5-30°C -
    Avoid direct sunlight Shelf Life  -  2 years in original closed package

1. You will achieve the best results by cleaning and drying surfaces before this application.
Thoroughly clean and dry all surfaces is a MUST!!!
2. Preload liquid by the applicator and then lightly brush the pad directly on the
surface evenly.
3. From now on, no buffing and wiping. Wait for the next 8hrs

      leather2     leather1

1. Keep away from eye contacts.
2. Keep away from children and fires.
3. Store in a cool dry place (< 25 °C).
4. Fully sealed when you don't use up.
5. Do NOT mix with other products.

Coating thickness will be increased by applying every one hour to achieve the robust protection. The scratch resistance and high gloss will be enhanced every time when you apply a new layer on the surface.

The coating is designed to be cured at the room temperature. 2 hours to be tack free, 8 hours will achieve full function. During the curing process of the initial 8 hours, if you notice any water drops on the surface, please remove it at once.

Your car was treated with a chemical substance designed to protect it. The coating layer is a very good protection against many influences. The maintenance is the most important after the coating treatment which will impact the coating longevity. For the normal condition, clean the car by water and shampoo is only the way. To clean by using microfiber cloth and car shampoo is enough.

The cleaning process is absolutely crucial in order to achieve long lasting results. The cleaner your cars' paint is before coating is applied, the longer the protective layer will last. If your car is waxed you need to make sure that all the wax is removed before you start applying this coating. Coating will only work over a long period if it is applied to the bare paint! Only seal one part of the car at a time and only do small parts, especially if you work on your own.